Healthy Wave PEMF Technology

Healthy Wave delivers superior PEMF Technology compared to other popular leading PEMF Mats. With the most earth based frequencies, the PEMF Healthy Wave Mats are best at providing you with the type of magnetic fields that our bodies align with.

Key Technology Features:

• Choice of different PEMF controllers with advanced digital signal generators:
• Multiwave controller, Square or Sine Wave signal generators feeding the PEMF Coils, Completely User Programmable or use Pre-programmed PEMF programs, 3 different PEMF individual PULSE widths, Selection of different PEMF field Intensities, selection of 30 different earth based frequencies - providing the possibility of millions of individualized PEMF programs for your personal needs.
• Multiple PEMF programs to align with the body Biorhythms.
• Earth Based magnetic field (PEMF) waveforms based on the TRUE NATURAL sinusoidal waveforms and seen with the Earth’s Schumann Resonance magnetic field.
• Choice of the Classic PEMF controller with sinusoidal digital signal generator feeding the PEMF Coils, with frequency 1-30 Pulses per second (in the Schumann Resonance range).
• True Pulses per Second definition of PEMF waveforms.
• Simulate similar NASA square wave in the Multiwave controller Programming.
• PEMF reverse polarity of the magnetic waveform (biphasic waveforms).
• Superior PEMF Field Distribution/Coil System design over the mat mat providing PEMF to the body. Verified with full Technical PEMF TESTING over/above the surface of the mat using proper instrumentation sensors. Providing comparison testing to other competitor mats.
• Overall PEMF design considers the full spectrum of technical issues.
• Providing factual technical testing and information to dispel disinformation.

Healthy Wave PEMF Programs

Throughout our different controllers there are a variety of different PEMF programs available providing you a wide variety of PEMF Programs to use.

Advanced Multi-wave Controller

This controller is our most advanced controller allowing you to change multiple variables.The MultiWave™  PEMF system provides:

• 12 advanced PEMF programs & ability to customize your own advanced programs.

• Fully customizable individual PEMF pulses, our system lets you modify every important aspect of the PEMF wave we previously discussed including Wave Form, Intensity, Frequency and Pulse Duration.

• The multitude of PEMF programs available provides a broad spectrum of overall health and wellness. There are actually millions of PEMF combinations a user can program with the MultiWave™ system.

The MultiWave™ PEMF uses an Advanced Signal Generator which produces both Sine and Square waves and is unique since it is fully PROGRAMMABLE by the user and the WAVE SHAPES can be CUSTOMIZED as follows:

• After the type of PEMF pulse is selected (sine or square wave) the following additional changes to the wave shape can be done:

• PEMF Intensity can be set to 100%, 75%, 50%, 25% or 10%
• The PEMF Pulse duration can be set to either Ultra Fast (0.5 milliseconds, very short duration), Fast (5 milliseconds, which is 10X longer than the Ultra Fast), and Medium (16 milliseconds, which is 3X longer than the Fast).

Plus the frequency of PEMF pulses can be changed from 1 to 30 pulses per second (which is in the Schumann resonances pulse range)

The MultiWave controller comes preprogrammed with ten 20 minute PEMF programs with 4x - 5 minute segments of unique PEMF wave shapes - And the user can further customize the 20 minute programs with their own desired wave shapes and the optional attributes. This creates a similar effect to the Schumann resonances where the pulses are changing in intensity, frequency and also pulse duration.

This diagram shows how the Multiwave 20 Minute programs use a digital signal generator to create different wave shapes of different frequencies, intensities and pulse durations with 4 x 5 minute unique segments.

Benefits of using the MutiWave Controller:

• This controller gives you the most variety of PEMF programmability and is designed with the biohacker in mind. But it is also easy to operate for all users since the controller is preprogrammed with single push button PEMF program use.
• Simulate the Earth’s Natural Schumann Resonance waveforms with the natural sinusoidal waveforms

• Simulate a similar NASA PEMF square wave and apply it to any of the PEMF programs

• Customize the PEMF programs for your specific needs

Basic Controller

This controller is our basic controller and comes with all our classic 4 & 5 therapy mats and is also included with the Multi-wave mats as well. 

• This controller lets you adjust from 1-30Hz for a total of 30 frequency settings.
• Sinusoidal waveform based on the natural Earth Based Schumann resonance waveforms.
• The frequency settings are a bit different from our advanced controller as these pulses are either individual evenly spaced our pulses or done in multiple groups of pulses to achieve the amount of pulses per second.  Eg. 24Hz is 6 groups of 4 pulses in a second for a total of 24 pulses. This allows you to get the true pulses per second with also getting to experience  mini pulse bursts.

Frequencies of individual pulses: 1, 2, 3, 4, 5, 6, 10, 12, 15, 18, 20, 25, 29, 30

Frequencies of groups of pulses: 7, 8, 9, 11, 13, 14, 16, 17, 19, 21, 22, 23, 24, 26, 27, 28

High Intensity 5 Therapy Pad controller

This controller is found on our High Intensity Matrix mat which also has very powerful red light therapy buts PEMF programs are also unique. 

• This controller runs at a 50% duty cycle meaning 50% of the time there are always pulses. It also has options for 1-30Hz but this is done as single pulses at 30Hz but pulse bursts at lower frequencies. For example, at 15 Hz there are 15 groups of 2 pulses (pulse bursts), at 10Hz there are 10 groups of 3 pulses (pulse bursts). This method while the frequencies don’t count individual pulses but instead the number of pulse bursts provides maximum energy transfer at every frequency which is ideal for this higher intensity PEMF pad.

Higher Intensity Controller

The Higher Intensity Controller uses out standard earth based sinusoidal waveform medium pulse width (16 milliseconds)

• Digital signal generator provides individually evenly spaced out pulses from 0.25 to 30Hz (user Programmable)
• Provide a total selection of 32 different frequency programs as the frequencies(True Pulses per second)
• 0.25Hz and 0.5Hz have been added on top of our regular 1-30 Pulses per Sec basic controller frequencies.

True Earth Based Magnetic Frequency Spectrum

Earth based frequency, aka the Schumann Resonance are low frequency magnetic fields below 100Hz. The Schumann Resonance is made up of continuous sinusoidal magnetic fields of 7.83Hz, 14.3Hz, 20.8Hz, 27.3Hz, 33.8Hz and sometimes higher. All these magnetic fields have long pulse widths.

Healthy Wave is the only top PEMF mat to also use long pulse widths which are the closest to the Schumann resonance Earth based frequencies as shown on spectrum analyzer tests.

Additionally all our PEMF waveforms, in terms of pulses per second in our programs, are truly Schumann Resonance based with them all being 30 pulses per sec and under, with a specific program providing 7.8 pulses per second.

With the combination of our longer pulse width settings and low earth based frequencies Healthy Wave is the only PEMF mat providing you true Earth Based frequencies in every dimension.

Schuman resonance data recorded from the GCI sensor site in Boulder Creek, California.

https://www.researchgate.net/figure/Schuman-resonance-data-recorded-from-the-GCI-sensor-site-in-Boulder-Creek-California_fig3_351624674

Healthy Wave PEMF Field Coil/Distribution

Healthy Wave Mats full sized mats use 6-8 coils distributed through the mat to provide excellent PEMF field coverage throughout the mat and above by several feet. These magnetic fields are powerful and through the strategic placement of the coils repel off each other propelling the PEMF fields upwards above the mat with minimal drop off intensity. This design creates a PEMF field that evens out the further away from the surface of the mat you get. This allows you to receive a even PEMF session when laying on Healthy Wave Mat.

Healthy Wave High Intensity PRO Mat PEMF Field Distribution at 0, 3.5, 5 & 10 Inches	Other “Large Coil” PEMF Field Distribution at 0, 3.5, 5 & 10 Inches
All models of Healthy Wave Mats have higher intensity then the majority of other popular PEMF Mats on the market. Our higher intensity coils create a powerful magnetic field that penetrates through and above anyone laying on the mat. As the PEMF Field gets higher the distribution becomes more even. Lower intensity systems with large spaced out coils create uneven PEMF fields that provide very little intensity anywhere above the surface of the mat. These magnetic fields immediately dissipate when you move away from the coil creating an uneven PEMF Field.	Even at 10X zoom of “large coil” PEMF mats shows uneven PEMF field distribution at very low intensity.

This testing was done by testing the PEMF intensity in the grid areas of the mat at the surface, 3.5 inches, 5 inches and 10 inches. There intensity readings are then modeled to provide you an approximate reading of the intensity you get at various distances above the mat in the different grid areas. You an see our individual comparisons to see how the Healthy Wave High Intensity Pro Mat and Multi-Wave Pro Mat compare against other popular PEMF Mats.

Healthy Wave Mat	Other Large Coil mat in previous example

Healthy Wave PEMF Intensity

Our PEMF coils are stronger than most with our High Intensity Series of Mats have peak gauss readings in the 20-40 gauss range on the surface of the mat. Combined with our superior Coil design this creates a slow intensity drop off rate meaning you get stronger PEMF intensity at 3.5 to 10 inches above the mat then compared to other higher intensity PEMF applicators.

Usually the justification for PEMF above 100 gauss is due to the quick drop off rate when using single coil applicators. Using a single coil applicator our tests show PEMF intensity dropping to around 4% at 3.5 inches and 1.5% inches at 5 inches. Our mats tests show our drop off rate still maintains up to 12% at 3.5 inches and 6% at 5 inches. This provides you with over 4x the intensity compared to single point applicators. Even our 30 peak gauss PEMF mat has more intensity at 5 inches and above compared to a 100 gauss applicator providing better deeper penetrating PEMF Therapy. This provides you with the ideal therapeutic PEMF intensity without being too high or too low.

Real Testing, Real Results

We used the most advanced equipment to measure PEMF Therapy. The vast majority of gauss meters cannot measure peak intensity of PEMF fields. We have found the most advanced equipment such as the F.W. Bell 5280 Gauss Meter which can capture the intensity of quick single PEMF Pulses. We also use highly accurate calibrated sensors that measure specific frequency ranges to measure all types of PEMF waves accurately. No one else in the PEMF industry is doing this and often most of the equipment we see used is the wrong equipment that is not precise or designed to measure PEMF therapy accurately. This often leads to people doing pseudo-science “tests” or using incorrect equipment to make up “bunk” results to market their products giving untrue and inaccurate information. We have tested our mats and other popular PEMF mats to show you the true and accurate facts of what each PEMF Mat is delivering to you. No made-up marketing mumbo jumbo, just solid real factual information based on tests.

Healthy Wave Electro smog & Dirty Electricity Elimination

Healthy Wave Mats all use the most advanced electro smog and dirty electricity filtering technology. Electronics create electro smog but Healthy Wave Mats are the worlds leading PEMF mats in eliminating and reducing all electro smog to miniscule levels. Many other PEMF mats have various levels of electro smog created from their electronics that are detectable from our tests.

The 2 primary methods of detecting electro smog are through near field probe measurements which can detect background unintended voltage spikes from 9000Hz to 16Mhz and through using a Trifled RF meter which detects. Healthy Wave eliminates all detectable electro smog & dirty electricity when performing these tests.
Additionally we reduce magnetic fields from our infrared heating elements to less then 3 milli gauss, in comparison many other knock off infrared pemf mats have high EMF reads when their heating is on.

This leave you with only the Healthy Waves!

Healthy Wave Mats eliminate the dirty electricity in our homes outlets that can be detected using a Tri Field RF meter & Stetzerier Meter

All RF is eliminated through our mats with zero detectable RF when PEMF & Infrared Heat programs running.

Other PEMF Mats can produce high level of RF Radiation Electro smog.

All higher frequencies are also eliminated from our near field probe tests shown on the blue line. The near field probe detects frequencies from approximately 9000Hz to 16Mhz.

Other PEMF mats can have high amount of background noise and high frequency voltage spikes indicating the presence of electro smog and dirty electricity when performing the near field probe test.